★★★★★ 5.0 · 116+ verified reviewsBS5837:2012 planning specialistsAll Surrey councils covered020 4531 6444 · admin@arbor-cultural.co.uk
Get my free quote☎
BS5837 tree reports Send and tree surveys for planning
★★★★★ 116+ verified reviewsBS5837:2012 planning specialists
Send · Surrey

BS5837 Tree Reports Send & Tree Surveys

Has the council asked for a tree survey or report on your Send application? Forward the exact wording with the latest drawings. You do not need to translate the technical terminology first.

Get My Fixed-Fee Quote →Call 020 4531 6444

Send the site address, current plans and the council wording. You do not need to know the report name first.

Send tree reports for planning

BS5837 Tree Reports and Tree Surveys in Send

Some enquiries need baseline survey information. Others already have a survey and need an AIA, AMS, Tree Protection Plan or supervision. We review what is already there before recommending more work.

This simple coordination point prevents a significant amount of avoidable repeat work. If the design is still moving, we can keep the first stage useful for design. If the layout is fixed or the council has already asked a specific question, we can go straight to the document that answers it.

For this sort of job we normally check how close the excavation gets, whether the contractor has enough working room, what happens with drainage/access, and whether the finished extension still makes sense next to the retained crowns.

Architect-led work in Send is much easier when everybody uses the same base information. Tree references, crowns, RPAs and the planning layout should stay coordinated from the first design discussion through to the AIA and any later protection documents.

If you are discharging a tree condition in Send, send both the approved planning drawings and the current construction information. We need to see whether what is now proposed on site still matches the strategy that Guildford Borough Council approved.

For a contractor taking over a Send site, the arboricultural documents need to become practical site instructions. Fencing, ground protection, storage restrictions and supervised operations should be obvious before machinery arrives.

If the council has asked for tree information, send the exact wording.

A request for a “tree report” does not always mean the same document. At the early design stage it may mean a BS5837 Tree Survey and Tree Constraints Plan. Once a planning layout exists, the missing piece may be an Arboricultural Impact Assessment. After permission, the authority may be asking for an Arboricultural Method Statement, Tree Protection Plan or supervision before work starts.

You do not need to make that decision yourself. Forward the email, validation request, tree-officer comment or planning condition and include the current drawings. We will review what is already available and explain the next useful step before you instruct.

What we check from the drawings

The tree issue is not always the building itself.

Once we see the site and proposal, we look at the whole development relationship rather than simply measuring the distance from the nearest trunk.

01

Buildings and excavation

How close the proposed foundations, demolition and level changes come to retained trees and their rooting areas.

02

Access and parking

Whether drives, turning areas, construction traffic or new surfacing create the main root or compaction issue.

03

Drainage and services

Routes for utilities and drainage can create conflicts even where the building footprint itself works well.

04

Crowns and future use

The completed development needs a sensible long-term relationship with retained crowns, light, gardens and normal occupation.

For homeowners, architects and developers

What working with us actually looks like.

You may only need one document right now. A survey can be enough at feasibility stage; an AIA may be the missing planning piece once a design exists; an AMS and TPP may be all that is outstanding after permission. We will not assume the full sequence is needed on day one.

The quickest way to get an accurate fixed-fee proposal is to show us the real project. A postcode alone tells us where the site is; the drawing and authority wording tell us what work the project actually needs.

If Guildford has imposed a deadline or pre-commencement condition, include it exactly as written. That allows the response to be built around the requirement the council will actually check.

If you prefer to speak first, call the team. If you already know what has been requested, use the quote form and attach the drawings. Either route is fine — the point is to get the real information in front of a consultant quickly.

What a strong BS5837 package should do

Make the planning position easy to follow.

The survey should tell the design team which trees matter. The plans should show the constraints clearly. The impact assessment should explain what the proposed development changes. The construction documents should then show how the retained trees will be protected when the scheme is built.

That sounds obvious, but coordination is where many projects go wrong. Tree numbers change between documents. An AIA refers to an older layout. The drainage route appears after the tree report is finished. The contractor receives a protection plan that leaves no workable route into the site.

We try to remove those gaps. The arboricultural information should be technically sound, but it also has to work with the real design and the real construction sequence.

Where a design conflict can be solved early, solve it early. That is usually easier than asking a planning officer to accept an avoidable impact later.

01

Survey

Establish the tree information and constraints.

02

Design

Use that information while the layout can still respond.

03

Assess

Explain impacts and mitigation against the actual proposal.

04

Build

Turn the approved strategy into clear site controls.

Planning BS5837 services

Tree-survey and report services for Send

If you already know what has been requested, choose the relevant service. If you do not, send the plans and the council wording and we will tell you which service is the appropriate starting point.

Guildford planning context

Planning near trees in Send

Send is handled by Guildford Borough Council for local planning purposes. BS5837 provides the technical framework, but the documents still need to answer the specific request made on your project.

If Send is going through Guildford Borough Council, send the council wording with the same drawing revision you are actually submitting.

If a Tree Preservation Order or conservation-area control is involved, include that information. Legal tree protection and the BS5837 development assessment are related but separate matters; one does not replace the other.

If the project has already been submitted and Guildford has raised a tree query, send the whole response with the latest planning drawings. A focused update may be enough. We do not assume the only answer is to restart the entire arboricultural package.

View Guildford planning ↗
After you request a quote

A straightforward route from enquiry to planning information.

1. We review what you send. The address, drawings and council wording normally show the project stage and whether any earlier arboricultural work is available.

2. We confirm the work and fee. You receive a fixed-fee proposal describing what will be undertaken and what information is required from you before the visit or reporting stage.

3. The site work is completed where required. For survey-based services, the relevant trees are inspected and recorded. For later-stage services, the approved information and current drawings are reviewed alongside any necessary site context.

4. The report or plan is prepared against the live project. We keep tree references and drawing revisions explicit so your architect, planning consultant or contractor can use the information without having to reinterpret it.

5. If the design changes, send the revision. We can confirm whether the existing work still stands or whether a targeted update is required before submission.

What we do not want you paying for.

We do not want you commissioning an AIA when the architect has not produced a layout worth assessing. We do not want you ordering a new survey without first checking whether a suitable existing survey can still be used. We do not want a contractor receiving a Method Statement that refers to an obsolete planning drawing.

The aim is to keep the work proportionate to the stage you are actually at and to make each document useful when it is produced.

That is also why the original council or consultant wording matters. It tells us what question needs answering now, rather than what might be needed six months later.

Common reasons planning tree information gets queried

Simple coordination mistakes can create avoidable delay.

Different drawing revisions. The report assesses one proposal and the application contains another.

Missing construction detail. The design may be acceptable, but there is no convincing explanation of how it can be built near retained trees.

Services added late. Drainage and utilities are routed through areas that the tree strategy assumed would remain undisturbed.

Neighbouring trees ignored. Off-site crowns or rooting areas influence the development even though the trees are not owned by the applicant.

Protection that cannot work on site. Fencing or ground-protection locations conflict with the access and logistics needed to build the scheme.

The practical answer

Get the tree information in front of the project team early enough to use it.

For design-stage work, that means survey and constraints information while the layout is still flexible. For planning-stage work, it means an AIA tied to the live proposal. For post-permission work, it means construction documents that reflect the approved strategy and the way the contractor is actually going to build.

If you are not sure which of those stages describes your Send project, send the information you have. We will make the next step clear.

Request A Quote →
Nearby Guildford areas

Tree reports around Send

If you have another site nearby, use the relevant local page below. The planning authority may be the same, but the arboricultural assessment still has to deal with the individual trees, drawings and development proposal on that site.

SealeShacklefordRipleyShalfordPuttenhamSherePirbrightTonghamPeasmarsh

Keep the tree report and architect drawings together.

If the footprint, access, drainage, services, levels or surfacing change, send the revision. The tree report, AIA, AMS and TPP should not gradually end up describing different versions of the same project.

That becomes even more important when the job moves from planning to construction. The contractor needs controls that match what was approved and what will actually be built. A coordinated update before work starts is far easier than resolving conflicting documents after a query or site problem.

Send questions

BS5837 tree-report questions for Send

These are the questions clients commonly ask before instructing. If your own council wording is more specific, send it with the drawings and we can apply it to the project directly.

Do I need a BS5837 tree survey for planning in Send?

You may if trees on or close to the site can influence the proposed development. Send the latest plans and any Guildford wording and we can tell you what information is appropriate before you instruct.

Which council handles planning in Send?

For the locations covered by this page, the Local Planning Authority is Guildford Borough Council. Use the authority’s current guidance, but send us the exact wording from your own application or condition because that is what the project needs to answer.

When would I need an AIA in Send?

Usually when there is a real planning layout to assess. The AIA explains removals, retention, impacts and mitigation against the proposal being submitted.

Do I need every BS5837 document before I submit planning?

Not necessarily. Some projects need survey and constraints information first, then an AIA for submission, with AMS/TPP requirements dealt with later through conditions.

Can I get a fixed-fee quote before instructing?

Yes. Send the available project information and we can provide a clear proposal for the defined work before instruction.

What is the difference between a Tree Constraints Plan and Tree Protection Plan?

The Constraints Plan is mainly a design-stage drawing. The Tree Protection Plan is mainly a construction-stage drawing showing fencing, ground protection and restricted working areas.

Does a TPO change the BS5837 assessment?

A TPO or conservation-area control is a separate legal matter. It does not replace the development assessment, and a BS5837 category does not tell you whether a tree is legally protected.

What should I send for a Send quote?

The site address, latest plans and the council/tree-officer wording are the best starting point. Include a topo, previous tree report and any deadline if you have them.

Send · ready to send?

Send the plans and the council wording. We will make the tree-report requirement clear.

Get a fixed-fee proposal for the BS5837 tree survey, report or construction-stage arboricultural work needed for your Send project.

Get My Fixed-Fee Quote →Email the plans