★★★★★ 5.0 · 116+ verified reviewsBS5837:2012 planning specialistsAll Surrey councils covered020 4531 6444 · admin@arbor-cultural.co.uk
Get my free quote☎
BS5837 tree reports Compton and tree surveys for planning
★★★★★ 116+ verified reviewsBS5837:2012 planning specialists
Compton · Surrey

BS5837 Tree Reports Compton & Tree Surveys

Does your architect need BS5837 information for a Compton scheme? Send the live drawing revision and any tree information already available.

Get My Fixed-Fee Quote →Call 020 4531 6444

Send the site address, current plans and the council wording. You do not need to know the report name first.

Compton tree reports for planning

BS5837 Tree Reports and Tree Surveys in Compton

The best arboricultural input is coordinated with the design rather than added afterwards. Crowns, Root Protection Areas, access, levels, services and construction space can all influence whether the proposal works comfortably with retained trees.

Send the current proposal and the exact Waverley wording. We can then tell you whether you need the survey/constraints stage, an AIA against the live layout, or construction-stage AMS/TPP information. The scope can therefore remain proportionate to the current stage rather than commissioning later-stage documents prematurely.

Keep the tree information on the architect’s live drawing, not in a separate universe. If the footprint, levels, access or services change, we want the tree assessment checked against that same revision before it goes in.

On many Compton projects the biggest tree issue is not the building. It can be the driveway, parking, drainage, levels, scaffolding or the route the contractor needs to use during construction. Those parts of the scheme belong in the arboricultural review too.

Use the wording from Waverley Borough Council as the starting brief. If it asks for a Method Statement, an impact report will not answer the condition. If it asks for impact information, a protection drawing on its own is not enough. We match the work to the actual request.

You do not need a perfect project pack to request a quote for Compton. The current PDF plans, the site address and the wording you have received are enough to start a sensible review in most cases.

If the council has asked for tree information, send the exact wording.

A request for a “tree report” does not always mean the same document. At the early design stage it may mean a BS5837 Tree Survey and Tree Constraints Plan. Once a planning layout exists, the missing piece may be an Arboricultural Impact Assessment. After permission, the authority may be asking for an Arboricultural Method Statement, Tree Protection Plan or supervision before work starts.

You do not need to make that decision yourself. Forward the email, validation request, tree-officer comment or planning condition and include the current drawings. We will review what is already available and explain the next useful step before you instruct.

What we check from the drawings

The tree issue is not always the building itself.

Once we see the site and proposal, we look at the whole development relationship rather than simply measuring the distance from the nearest trunk.

01

Buildings and excavation

How close the proposed foundations, demolition and level changes come to retained trees and their rooting areas.

02

Access and parking

Whether drives, turning areas, construction traffic or new surfacing create the main root or compaction issue.

03

Drainage and services

Routes for utilities and drainage can create conflicts even where the building footprint itself works well.

04

Crowns and future use

The completed development needs a sensible long-term relationship with retained crowns, light, gardens and normal occupation.

For homeowners, architects and developers

What working with us actually looks like.

Tree reports are often commissioned at the point a client is already worried about delay. The best response is clarity: what has been asked for, what information already exists, what needs a site visit and what can be prepared from the current design information.

We keep the commercial side straightforward as well. Once the project information is reviewed, you receive a fixed-fee proposal for the defined work rather than an open-ended instruction with no clear deliverables.

Where the drawings are still moving, say so. It may be better to complete the baseline survey now and hold the impact assessment until the architect has a layout worth assessing. That can save both time and duplicated work.

If you prefer to speak first, call the team. If you already know what has been requested, use the quote form and attach the drawings. Either route is fine — the point is to get the real information in front of a consultant quickly.

What a strong BS5837 package should do

Make the planning position easy to follow.

The survey should tell the design team which trees matter. The plans should show the constraints clearly. The impact assessment should explain what the proposed development changes. The construction documents should then show how the retained trees will be protected when the scheme is built.

That sounds obvious, but coordination is where many projects go wrong. Tree numbers change between documents. An AIA refers to an older layout. The drainage route appears after the tree report is finished. The contractor receives a protection plan that leaves no workable route into the site.

We try to remove those gaps. The arboricultural information should be technically sound, but it also has to work with the real design and the real construction sequence.

Where a design conflict can be solved early, solve it early. That is usually easier than asking a planning officer to accept an avoidable impact later.

01

Survey

Establish the tree information and constraints.

02

Design

Use that information while the layout can still respond.

03

Assess

Explain impacts and mitigation against the actual proposal.

04

Build

Turn the approved strategy into clear site controls.

Planning BS5837 services

Tree-survey and report services for Compton

If you already know what has been requested, choose the relevant service. If you do not, send the plans and the council wording and we will tell you which service is the appropriate starting point.

Waverley planning context

Planning near trees in Compton

Compton is handled by Waverley Borough Council for local planning purposes. BS5837 provides the technical framework, but the documents still need to answer the specific request made on your project.

For Compton work under Waverley, the main thing is knowing where you are in the process: still designing, ready to submit, or trying to discharge a condition.

If a Tree Preservation Order or conservation-area control is involved, include that information. Legal tree protection and the BS5837 development assessment are related but separate matters; one does not replace the other.

If the project has already been submitted and Waverley has raised a tree query, send the whole response with the latest planning drawings. A focused update may be enough. We do not assume the only answer is to restart the entire arboricultural package.

View Waverley planning and building ↗
After you request a quote

A straightforward route from enquiry to planning information.

1. We review what you send. The address, drawings and council wording normally show the project stage and whether any earlier arboricultural work is available.

2. We confirm the work and fee. You receive a fixed-fee proposal describing what will be undertaken and what information is required from you before the visit or reporting stage.

3. The site work is completed where required. For survey-based services, the relevant trees are inspected and recorded. For later-stage services, the approved information and current drawings are reviewed alongside any necessary site context.

4. The report or plan is prepared against the live project. We keep tree references and drawing revisions explicit so your architect, planning consultant or contractor can use the information without having to reinterpret it.

5. If the design changes, send the revision. We can confirm whether the existing work still stands or whether a targeted update is required before submission.

What we do not want you paying for.

We do not want you commissioning an AIA when the architect has not produced a layout worth assessing. We do not want you ordering a new survey without first checking whether a suitable existing survey can still be used. We do not want a contractor receiving a Method Statement that refers to an obsolete planning drawing.

The aim is to keep the work proportionate to the stage you are actually at and to make each document useful when it is produced.

That is also why the original council or consultant wording matters. It tells us what question needs answering now, rather than what might be needed six months later.

Common reasons planning tree information gets queried

Simple coordination mistakes can create avoidable delay.

Different drawing revisions. The report assesses one proposal and the application contains another.

Missing construction detail. The design may be acceptable, but there is no convincing explanation of how it can be built near retained trees.

Services added late. Drainage and utilities are routed through areas that the tree strategy assumed would remain undisturbed.

Neighbouring trees ignored. Off-site crowns or rooting areas influence the development even though the trees are not owned by the applicant.

Protection that cannot work on site. Fencing or ground-protection locations conflict with the access and logistics needed to build the scheme.

The practical answer

Get the tree information in front of the project team early enough to use it.

For design-stage work, that means survey and constraints information while the layout is still flexible. For planning-stage work, it means an AIA tied to the live proposal. For post-permission work, it means construction documents that reflect the approved strategy and the way the contractor is actually going to build.

If you are not sure which of those stages describes your Compton project, send the information you have. We will make the next step clear.

Request A Quote →
Nearby Waverley areas

Tree reports around Compton

If you have another site nearby, use the relevant local page below. The planning authority may be the same, but the arboricultural assessment still has to deal with the individual trees, drawings and development proposal on that site.

ChurtCranleighChiddingfoldDockenfieldBusbridgeDunsfoldBramleyElsteadBadshot Lea

Keep the tree report and architect drawings together.

If the footprint, access, drainage, services, levels or surfacing change, send the revision. The tree report, AIA, AMS and TPP should not gradually end up describing different versions of the same project.

That becomes even more important when the job moves from planning to construction. The contractor needs controls that match what was approved and what will actually be built. A coordinated update before work starts is far easier than resolving conflicting documents after a query or site problem.

Compton questions

BS5837 tree-report questions for Compton

These are the questions clients commonly ask before instructing. If your own council wording is more specific, send it with the drawings and we can apply it to the project directly.

Do I need a BS5837 tree survey for planning in Compton?

You may if trees on or close to the site can influence the proposed development. Send the latest plans and any Waverley wording and we can tell you what information is appropriate before you instruct.

Which council handles planning in Compton?

For the locations covered by this page, the Local Planning Authority is Waverley Borough Council. Use the authority’s current guidance, but send us the exact wording from your own application or condition because that is what the project needs to answer.

What is the difference between a Tree Constraints Plan and Tree Protection Plan?

The Constraints Plan is mainly a design-stage drawing. The Tree Protection Plan is mainly a construction-stage drawing showing fencing, ground protection and restricted working areas.

Does a TPO change the BS5837 assessment?

A TPO or conservation-area control is a separate legal matter. It does not replace the development assessment, and a BS5837 category does not tell you whether a tree is legally protected.

What should I send for a Compton quote?

The site address, latest plans and the council/tree-officer wording are the best starting point. Include a topo, previous tree report and any deadline if you have them.

Why has the council asked for an Arboricultural Method Statement?

Normally because it wants the sensitive construction methods agreed before work starts, for example excavation, access, surfacing, services or other operations close to retained trees.

My Compton design changed after the report was prepared. What should I do?

Send the revised drawing before submission. A change to footprint, access, levels, drainage, services or surfacing can alter the arboricultural position, but a targeted update may be sufficient.

What can a BS5837 tree report include in Compton?

Depending on project stage it can involve the tree survey, Tree Constraints Plan, Arboricultural Impact Assessment, Arboricultural Method Statement, Tree Protection Plan and arboricultural supervision. You may only need part of that sequence now.

Compton · ready to send?

Send the plans and the council wording. We will make the tree-report requirement clear.

Get a fixed-fee proposal for the BS5837 tree survey, report or construction-stage arboricultural work needed for your Compton project.

Get My Fixed-Fee Quote →Email the plans